Restart-NetAdapter
CautionBounce a NIC
Restart-NetAdapter -Name <name>
Disables/enables the adapter in one step — the remote equivalent of replugging the cable.
Examples
Restart-NetAdapter -Name 'Ethernet'Restart the NIC
Syntax
Restart-NetAdapter <name> / Disable-/Enable-NetAdapter
Before you run it
Drops the link briefly — risky remotely.
Related commands
- Get-NetAdapterList network adapters
- nmcliManage NetworkManager
The same reference, with no signal at all
Every command and flow from this site, held on your device and searchable with no connection. Free to install, no ads.
Get it free on the App Store