Get-NetAdapter
SafeList network adapters
Get-NetAdapter
Lists NICs with link state and speed. Pair with Disable/Enable-NetAdapter to bounce an adapter.
Examples
Get-NetAdapter | ? Status -eq 'Up'Only adapters that are up
Syntax
Get-NetAdapter [-Name name] [-Physical]
Before you run it
Read only (Disable cuts the link).
Related commands
- Get-NetIPAddressGet IP configuration
- ethtoolNIC link diagnostics
- getmacShow MAC addresses
The same reference, with no signal at all
Every command and flow from this site, held on your device and searchable with no connection. Free to install, no ads.
Get it free on the App Store