get system interface
SafeInterface status/IP
get system interface
Shows each interface's IP and status.
Examples
get system interface physicalPhysical interface statusshow system interface port1port1 configuration (IP, allowed admin access)diagnose hardware deviceinfo nic port1Link speed and error countersget system interface | grep port1Only the port1 line from the list
Syntax
get system interface [physical]
Key points
- With physical, you see link up/down, speed and duplex.
- status down means administratively disabled; a physical link down means no cable or peer.
- Without ping in allowaccess, pings to that interface get no reply.
When it does not work
- A speed or duplex mismatch shows up as rising errors in deviceinfo nic. Make both ends match.
Before you run it
Read-only.
Related commands
- get router info routing-table allRouting table
- get system arpARP table (Forti)
You can carry a laptop to the rack. Signal will not follow.
Check syntax standing in front of the hardware, with no connection at all. The app keeps 1,510 commands and 120 fix flows on your device. Free to install, no ads (some content is a one-time purchase).
Get it free on the App Store