show power inline
SafePoE power status
show power inline
Per-port PoE draw and the switch's power budget — dead APs and phones often mean an exhausted budget.
Examples
show power inline Gi1/0/12Power on one port
Syntax
show power inline [interface]
Before you run it
Read only.
Used when you see
PoE device won't power on
1
See the whole flow →Check per-port power and the PoE budgetIf the budget's gone, adjust priorities or classes.
Related commands
- show interfaces statusPort status at a glance
- show versionDevice info / IOS version
You can carry a laptop to the rack. Signal will not follow.
Check syntax standing in front of the hardware, with no connection at all. Free to install, no ads.
Get it free on the App Store