show status pp 1
SafePPPoE session status
show status pp 1
Shows PP (PPPoE) session state, assigned IP and disconnect reasons — first split between line and router.
Examples
show status pp 1Session state and WAN IP
Syntax
show status pp <peer番号>
Before you run it
Read only.
Related commands
- connect pp 1Reconnect a PP session
- show logShow log (RTX)
You can carry a laptop to the rack. Signal will not follow.
Check syntax standing in front of the hardware, with no connection at all. Free to install, no ads.
Get it free on the App Store