JAEN

Cisco IOS

show spanning-tree

SafeSpanning-tree state

show spanning-tree

Shows STP root and port roles (loop prevention).

Examples

  • show spanning-tree vlan 10STP for VLAN 10

Syntax

show spanning-tree [vlan <id>]

Before you run it

Read-only.

Used when you see

Suspected L2 loop
1
Check STP state and topology-change churn
See the whole flow →

Related commands

You can carry a laptop to the rack. Signal will not follow.

Check syntax standing in front of the hardware, with no connection at all. Free to install, no ads.

Get it free on the App Store